2k Pure Coat acrylic polyurethane
Regular price $84.99|
2k pure coat PU is a two component non-yellowing clear gloss finish acrylic modified polyurethane coating. This coating has been formulated to combine chemical resistance with durable performance as well as 100% UV resistance for all indoor and outdoor timber and decorative finishes. It can be applied via foam roller or spray gun . 2k Pure Coat is also food safe once fully cured. This product allows for solid timber furniture to be coated and protected in just a few coats. It has a super high gloss finish that will wow you. Coverage is around 140ML per square meter per coat . This coating requires a dust free ventilated area when applying. Application instructions will be on the can however please read a few tips below. Apply a light “dust coat” to seal the timber pours before applying 2nd 3rd and 4th coats. Wait 2 hours between coats( this may vary based on ambient temps ) Lightly sand the surface before each coat using 180 -400 grit sandpaper. A microfibre roller is recommended for rolling applications, make sure lose hair is away from roller , running the roller over some adhesive tape before application can remove any lose fibres from the roller . APPLY 2-3 COATS FOR A SATIN LIKE FINISH AND 3+ COATS FOR HIGHER GLOSS. As this is a coating that forms a film, if you don’t have a dust free environment you can expect some surface dust imperfections. These can be buffed out or left as they aren’t overly noticeable until close up. Safety must be followed when using this product. Proper ventilated area along with proper vapour filtered mask and eye protection must be worn at all times . clean up using xylene . Flush spray gun using xylene Available in 1.25, 2.5 ,5 & 10 L kits . |
