SDS PART A
SDS PART B
Fastaway is a 2 part epoxy resin system designed for small volume fast cures. Fastaway is a supreme fast curing epoxy with excellent UV stability and air release, it is truly like NO other fast curing epoxy on the market today.
PLEASE DO NOT MEASURE WITH SCALES - it will cause the ratios to be out ultimately causing un cured epoxy. All measuring should be done by volume only in a mixing cup or utensil with measurements on the side This system is designed for jewellery makers , small mould volumed silicone moulds, timber void fillers and any other smaller volumed epoxy users .
Fastaway gives users the ability to re-layer within 2 hours without colour bleeding, larger volumes up to 10mm in thickness can be demoulded within hours of being poured . This product is a truly unique system providing amazing clarity for its cure time . With working time of 25-30 mins this product is a game changer for makers . Makers will experience higher work turnover due to the cure times and high high end results
- Fast re-layer time
- same day demould ( 6 hours )
- sand the same day ( volume dependent)
-crystal clear amazing colour for a fast curing epoxy
- high gloss finish , blush resistant
- crack filler in timber
-UV stable
-cured to 80-85D in just 24 hours
Please be aware this product has a high exotherm meaning excessive amounts of epoxy can cause extreme heat. DO NOT LEAVE DEEP VOLUMES (above 10mm) OF EPOXY IN MIXING CUPS FOR PERIODS OF TIME. Do not exceed 10mm in thickness for single pours. Avoid working in conditions above 25 degrees ( volume dependent).
Do not apply excessive amounts of external heat ie: butane torch or heat mats.
For more info refer to SDS and TDS, alternatively contact us for more help .
